Nyfors AutoCleaver S1

The 41R is a equipped with good mobility and our wireless communication function, “Active Blade Management Technology”, where the splicer is connected to and monitors the fiber cleaver and ribbon fiber stripper With Active Blade Management Technology, it is far easier to maintain high quality fiber preparation. This product monitors every fiber’s end shape to assess the cleave quality. If the cleaved fiber is bad due to a worn blade position, this product sends a command to the fiber cleaver to rotate to the next viable blade position. The cleaver then executes the blade rotation automatically via an internal motor. This functionality greatly prevents operators from making a bad splice due to a worn out blade position. In addition, both the heating temperature and heating time of the ribbon fiber stripper are automatically changed according to the splice mode setting.

The FST-12 is a tool to quickly split a 12-fiber ribbon into individual fibers or sub-groups with separation ratio from 1:11 to 6:6.

The CT-101 is designed for cleaving silica fiber with 80 to 250mm cladding diameter, specially for its angle cleaving capability.

Nyfors Product. The AutoCleaver LDA is an automatic system for precision cleaving of circular large diameter fibers (LDF). It is a special version of NYFORS’ well known large diameter cleaver designed for both perpendicular and angled cleaving of fibers ranging from 230 up to more than 800 μm in diameter.